Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Webhook is a user-defined HTTP callback that allows one system or application to send real-time data to another system or application as soon as an event occurs.

Instead of the traditional polling mechanism where one system repeatedly checks another for updates, a webhook enables real-time data delivery.

See https://webmethods.io/

Overview

This integration allows you to send data to your webhook based on the Event Sets defined for the Webhook.

Here is an example of the ‘New Asset Added’ being used.

image-20240105-205504.png

Getting Started

  1. Navigate to Global > Overview and tap the Integrations icon from the right-side toolbar.

image-20240105-183925.png

Tap on the Webhook tile.

image-20240105-205625.png

Setup

Credentials

You need to provide the required details as shown below.

image-20240105-205753.png

Visit the link below to learn how to fetch Authentication Header Key and Authentication Header Value

https://docs.webmethods.io/integration/developer_guide/webhook/#ta-webhook_authentication

Event Set

This is where you tell the integration what events should generate an alert. Tap the Add button to view and add your desired event sets.

image-20240105-210428.png

Give the Event Set a name of your choosing, select a Notify By option, and select the Event Set(s) you want to create the alert(s) for.

image-20240105-210512.png

Tap on the Category name (expand style menu) to see the individual Event Sets based on Category.

image-20240105-210543.png

Use the checkboxes to select the Event Sets, then tap the Save button. Upon doing so, you will be prompted with a Confirmation box asking if you want to create an Integration Profile or save your event set.

image-20240105-200305.png

Integration Rules

Here, you will create a name of your choosing and link the previously created Event Set. Tap Save to finish.

image-20240105-210615.png

You will be prompted with a Confirmation message to save the Integration Rule or tap Yes to save and move to the Company Mapping section.

image-20240105-210950.png

Company Mapping

This is where you map your ConnectSecure company to the Integration Rule(s) and can enable the ‘Create MSTeams Alert’ box to enable this rule.

image-20240105-211015.png

Upon saving, the Selected Companies section appears with your mapping selection(s).

image-20240105-201253.png

Tap Finish to complete the setup.

Get Support

If you have an integration-related inquiry, please email support@connectsecure.com with the details, and our Support Team will assist you.

  • No labels