V4 Support and Troubleshooting FAQ

V4 Troubleshooting FAQ Table of Contents

Checking Logs and Default Installation Paths

The default installation path:

Windows: C:\Program Files (x86)\CyberCNSAgent

MacOS/Linux: /opt/CyberCNSAgent

The default path for the logs:

Windows: C:\Program Files (x86)\CyberCNSAgent\logs

MacOS/Linux: /opt/CyberCNSAgent/logs

The default log files:

• cybercns.log (main)

• cybercns_monitor.log

• cyberpatch.log (patching)

How To Check Installed Software for Linux using OSQUERY

Share this output with the support team

Remediated Vulnerabilities Still Showing in the Portal

1. Make sure a recent scan has been completed

2. Use the OSQUERY to determine application details

How To: Use OSQuery to Validate Installed Software

Scan Issues

SNMP Scan Issues

Solution 1: For Version 1 and Version 2 

1. Download the file using the link below
   https://betadev.mycybercns.com/agents/net-snmp-5.5.0-2.x64.exe 

2. Open PowerShell as administrator

3. Navigate to the download location and run the below command
   --> Start-Process net-snmp-5.5.0-2.x64.exe** 

4. Follow the installation steps and install the SNMPwalk 

5. Run the below command in PowerShell and share the output with us.
   --> snmpwalk -v1 -c snmpstring targetIP
   for example, snmpwalk -v1 -c public 192.168.0.1
   --> snmpwalk -v2c -c snmpstring targetIP
   for example, snmpwalk -v2c -c public 192.168.0.1
   -version 2 -community_string public -ip 

Solution 2: All 3 versions of SNMP 

Here are the troubleshooting steps for validating SNMP communication in PowerShell:

1. Download the validation tool from the provided link:
   https://betadev.mycybercns.com/agents/snmp/validatesnmp.exe 

2. Run PowerShell as Administrator: 

3. Navigate to the location where the downloaded file is located, and open PowerShell as an administrator. 

4. Execute the validation command:

For SNMP version 1:
.\validatesnmp.exe -version 1 -community_string <string> -ip <targetip> 

For SNMP version 2:
.\validatesnmp.exe -version 2 -community_string <string> -ip <targetip> 

For SNMP version 3:
.\validatesnmp.exe -version 3 -security_name <username> -auth_protocal <auth_protocol> -auth_password <auth_password> -privacy_protocol <priv_protocol> -privacy_password <priv_passsword> -ip <targetip> 

Replace <string> with the SNMP community string for SNMP v1 or v2, <targetip> with the IP address of the target device, <securityname> with the SNMPv3 username, <auth_protocol> with the authentication protocol (e.g., MD5 or SHA), <auth_password> with the authentication password, <priv_protocol> with the privacy protocol (e.g., AES or DES), and <priv_password> with the privacy password. 

Windows Asset Credential Scan Issues (SMB)

You can validate the credentials from the probe agent machine by following the below steps: 

1. Download validate smb.exe from the link below.
   https://betadev.mycybercns.com/agents/validatesmb/validatesmb.exe 

2. Run the Command

3. Open PowerShell as an administrator

4. Navigate to the location of the file and run the appropriate command based on your asset type: 

For a Domain Asset: 

 .\validatesmb.exe validatesmb <IP> <domain(FQDN)> <user> <password> 
Sample: .\validatesmb.exe validatesmb 10.0.0.202 hash.local admin cc@#$123ns 

For a Workgroup Asset: 

 
.\validatesmb.exe validatesmb <IP> '""' <user> <password> 
Sample: 
.\validatesmb.exe validatesmb 10.0.0.202 '""' trator cc@#$123ns 

If the validate SMB fails, you can verify it using the run window from the agent machine. Please initiate Windows run and enter the IP address after the admin$, click enter, and verify that you can access the remote asset admin$. It will prompt you to enter the credential, please enter the valid credential. 

for e.g. \\192.168.1.1\admin$ 

Active Directory AD Scan Issues

Ensure correct information is added, such as:

1. The IP address in the DC name to avoid any DNS lookup issues

2. FQDN in the domain name and the username without a domain or ".\" 

NMAP Scan Issues

If the nmap is not determining any assets, follow the below steps to troubleshoot:

1. Open the command prompt as an administrator on the agent machine. 

2. Navigate to the CyberCNS agent folder cd "C:\Program Files (x86)\CyberCNSAgent\nmap" 

3. Run the nmap command 

.\nmap.exe --privileged -sV -T3 --min-parallelism 100 --max-parallelism 255 -script-timeout 1500000ms --top-ports 3000 -Pn --host-timeout 1900000ms --max-hostgroup 64 --min-hostgroup 30 --max-retries 2 --max-rtt-timeout 200000ms --exclude-ports 9100-9120,515,6101,631,59100,10001,9400,9500,9999,1058,721-731,1023,2000,2501,2503,3001,6869 --script auth,vuln,discovery,safe,ssl* <targetIP-range> 

Sample command: 

.\nmap.exe --privileged -sV -T3 --min-parallelism 100 --max-parallelism 255 -script-timeout 1500000ms --top-ports 3000 -Pn --host-timeout 1900000ms --max-hostgroup 64 --min-hostgroup 30 --max-retries 2 --max-rtt-timeout 200000ms --exclude-ports 9100-9120,515,6101,631,59100,10001,9400,9500,9999,1058,721-731,1023,2000,2501,2503,3001,6869 --script auth,vuln,discovery,safe,ssl* 192.168.1.1/24 

Firewall Scan - Error Connecting to Server

If you encounter a firewall scan error when connecting to the server, it may be due to communication or a bad username and password. Please verify that the firewall is communicable from the Probe agent machine via SSH or API. 

AD Audit Scan Issues / Alerts Not Running

Run the script below 

ActiveDirectory_AuditEnable_GPO-Policy.zip 

Modify a user/computer/security group and verify if alerts are coming correctly. 

Validate Linux Probe Connection Using SNMP

1. Install the SNMP tool.

sudo apt update
sudo apt install snmp snmp-mibs-downloader

2. Run the below command in the terminal and share the output with us.
   snmpwalk -v1 -c snmpstring targetIP
   for example, snmpwalk -v1 -c public 192.168.0.1
   snmpwalk -v2c -c snmpstring targetIP
   for example, snmpwalk -v2c -c public 192.168.0.1

Bitdefender Total Security - Firewall Settings to Allow Patching

From the Protection Features menu tap on Protection > Firewall Settings

Enable the ‘connectsecurepatch.exe’ to allow the patching executable

Azure SQL Server False Positive(s)

Detection based on NMAP

1. Open PowerShell as Administrator

2. Navigate to the agent NMAP folder

(IE: cd "C:\Program Files (x86)\CyberCNSAgent\nmap")

3. Run the command

.\nmap.exe --privileged -sV -T3 --min-parallelism 100 --max-parallelism 255 -script-timeout 1500000ms --top-ports 3000 -Pn --host-timeout 1900000ms --max-hostgroup 64 --min-hostgroup 30 --max-retries 2 --max-rtt-timeout 200000ms --script auth,vuln,discovery,safe,ssl* <targetIP>

Share the results of this to our support team!

Validation for Mapped Credentials

Validation of Mapped credentials can be performed from the portal itself, and the same can be viewed in the cyberutilites.log located in the "C:\Program Files (x86)\CyberCNSAgent\logs" 

1. Navigate to the agents > Probe Agent > click on the agent action > select Scan  

2. Select the Validate Credential scan type and click on save 

Verify Windows Default Application Version Issue

Use the below command

Get-AppxPackage -AllUsers | Where-Object {$_.Name -Like "appName"} 

Sample: Get-AppxPackage -AllUsers | Where-Object {$_.Name -Like "Microsoft.Microsoft3DViewer"} 

Enable SMB in Remote Host for Probe to Assess OS and Application Vulnerabilities

Run the below command on the reported host and initiate a scan.

These commands will help set SMB as True and help successfully scan an asset.

-> Set-ItemProperty -Path "HKLM:\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters" SMB2 -Type DWORD -Value 1 -Force 

-> Set-NetFirewallRule -DisplayName "File And Printer Sharing (SMB-In)" -Enabled true -Profile Any 

-> Set-NetFirewallRule -DisplayName "File And Printer Sharing (NB-Session-In)" -Enabled true -Profile Any 

For Windows 11 

Additionally, add below registry key post enabling SMB for Windows 11 to get information using SMB: 

reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v LocalAccountTokenFilterPolicy /t REG_DWORD /d 1 /f 

Vulnerabilities for Browser Extension Program

To determine the issue with the browser extension, the below osqueryi can be executed 

Open PowerShell as an administrator
Step 1:

If the asset is scanned by a lightweight agent

 cd "C:\Program Files (x86)\CyberCNSAgent"

If the asset is scanned by a probe agent

cd "C:\Windows\CyberCNSAgent"

Step 2:

.\osqueryi.exe

Step 3: Run this query with the app name:

SELECT name, browser_type,version,path,sha1(name||path) as unique_id FROM chrome_extensions WHERE chrome_extensions.uid IN (SELECT uid FROM users) group by unique_id. 

V4 API General Information

V4 API Postman Collection

ConnectSecure API.postman_collection.json 

Prerequisites for General Scanning and Patching

Create an exception to ConnectSecure primary executables and dependencies in the agent installation folder.

Windows - C:\Program Files (x86)\CyberCNSAgent" 

Linux - /opt/CyberCNSAgent 

Mac - /opt/CyberCNSAgent 

Ports used for communication include:

• Windows - SMB protocol - Port 445 

• Linux, Mac, and VMware - SSH protocol - Port 22 and any custom port defined in the credentials 

• Firewall scan - SSH and API - Port 22 and 443 and any custom port defined in the credentials)  

• Network devices & VMware - SNMP protocol - ports 161, 162 

ConnectSecure primary executables include:

• connectsecurepatch.exe 

• cybercnsagent.exe 

• cybercnsagent_arm 

• cybercnsagent_darwin 

• cybercnsagent_linux 

• cybercnsagentmonitor.exe 

• cyberutilities.exe 

• firewall_configs.zip 

• main.ps1 

• nmap.zip 

• osqueryi.exe 

• osqueryi_darwin 

• osqueryi_arm 

• osqueryi_linux 

• scripts.zip 

• vcruntime140.dll 

TLS 1.0 Vulnerability False Positive

1. Open PowerShell as an administrator on the reported agent machine

2. Navigate to the Agent NMAP folder
   cd C:\Program Files (x86)\CyberCNSAgent\nmap\

3. Run the below NMAP command
   .\nmap.exe --script ssl-enum-ciphers -p 3389 <Target_IP>

Capture that output and share it with our engineering teams.

403 Error with Microsoft Entra ID CSP Integration

Please make sure that the user for granting consent to the application is part of the Admin Agent Security Group and has the Azure AD legacy MFA enabled.

Why Default Pre/Installed Patched Applications Still Showing

To verify the Windows default application version issue, the below command can be used:

Get-AppxPackage -AllUsers | Where-Object {$_.Name -Like "appName"} 

Sample: Get-AppxPackage -AllUsers | Where-Object {$_.Name -Like "Microsoft.Microsoft3DViewer"} 

Getting Password Alert/User Login Alerts with Bad Password Attempt

We do password brute force attempts with our nmap and the snmp scanning below shows the usernames that are used.

The brute force scan will be performed by the Probe agent, and our lightweight agent does not have the nmap, so it will not do any network vulnerability scanning. 

This is based on the SMB, RDP, and SNMP ports that our agent, by default, scans for brute force passwords to attempt to ensure that they have a strong password set up as a part of our network vulnerability scanning and is listed under the network vulnerability if anything is discovered. you can avoid this issue by excluding ports 445, 3389, etc. from scanning. 

Please find below the list of usernames that we use for brute-force password scanning. 
root 
admin 
administrator 
webadmin 
sysadmin 
netadmin 
guest 
user 
web 
test 
SNMP String 
public 
private 
admin 

Patched Assets Not Listed

For the Windows version related to "KB" security patch-related issues and queries? Run the below and share the output from the reported machine. 

1. wmic qfe get HotfixID | findstr /v HotFixID 

2. $UpdateSession = New-Object -ComObject "Microsoft.Update.Session"; $UpdateSearcher = $UpdateSession.CreateUpdateSearcher(); $Results = $UpdateSearcher.Search("IsInstalled=1"); $updates = ForEach($update in $Results.Updates) {"KB"+[String]$update.KBArticleIDs}; $updates 

3. Also, please run the below queries in PowerShell as Administrator and share the output with us 
   -> Navigate to CyberCNSAgent folder 
   cd "C:\Program Files (x86)\CyberCNSAgent" 
   -> Run the below command 
   .\osqueryi.exe 

4. select  CONCAT('KB',replace(split(split(title, 'KB',1),' ',0),')','')) as hotfix_id,description, datetime(date,'unixepoch') as install_date,'' as installed_by,'' as installed_on from windows_update_history where title like '%KB%' group by split(split(title, 'KB',1),' ',0); 

5. select hotfix_id,description,installed_by,install_date,installed_on from patches group by hotfix_id; 

Active Directory Data Not Loading (OU, Users, Computers, GPO)

Please execute the below scripts and send the output for our team to debug:

• AD_Gpo.ps1.zip 

• AD_Computers.ps1.zip 

• ADusers.ps1.zip

• ADOUCheck.ps1.zip 

Is Reboot Required?

Run the below script and verify the reboot status:

Validate_reboot_required.ps1 

Cyberutilities.log Errors When SMB Not Enabled

The error: "failed to connect to '192.1.0.1:445': [winerror 10060] a connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond"}
2024-08-05 15:38:07,098 INFO smbClient execute_exec 665 SMB scan completed for 192.168.163.62 with status 0 output  err CyberCNS Agent 

Note: For the above error customer must enable the SMB protocol on the remote host 

Enable SMB Communication with PowerShell Commands

These commands will help set SMB to True and help successfully scan an asset.

• Set-ItemProperty -Path "HKLM:\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters" SMB2 -Type DWORD -Value 1 -Force

• Set-NetFirewallRule -DisplayName "File And Printer Sharing (SMB-In)" -Enabled true -Profile Any

• Set-NetFirewallRule -DisplayName "File And Printer Sharing (NB-Session-In)" -Enabled true -Profile Any

Additionally, add below registry key post enabling SMB for Windows 11 to get information using SMB:

• reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v LocalAccountTokenFilterPolicy /t REG_DWORD /d 1 /f

ConnectSecure V4 Agent Update Script

This script can help with basic troubleshooting when the agent is not showing online and will ensure the CyberCNSAgent.exe is validated and running the latest version.

Tap the file below to grab the script:

You must replace and update the 'x' with your Company and Tenant ID

Error Installing vc_dist.x86.exe

Install the "VC_redist.x86.exe" manually from the cybercns agent folder and verify by initiating the scan once. The file is in "C:\Program Files (x86)\CyberCNSAgent\nmap". 

Error Installing npcap.exe

Install the "npcap.exe" manually by downloading it using the link below and verify by initiating the scan once. 

https://npcap.com/dist/npcap-1.79.exe 

Error SMB Enabled but Username or Password Invalid

Port 445(SMB):- Error in validating AD Credentials:- response error: The attempted logon is invalid. This is either due to a bad username or authentication information. Port 636(LDAPS):- LDAP Result Code 200 "Network Error": read tcp 10.0.1.154:50974->10.0.1.153:636: wsarecv: An existing connection was forcibly closed by the remote host. Port 389(LDAP):- LDAP Result Code 49 "Invalid Credentials": 80090308: LdapErr: DSID-0C09050E, comment: AcceptSecurityContext error, data 52e, v4f7c 

Check Agent Offline Status

How To: Check Agent Offline Status

Patching Zoom Application System Restart/Reboot

To de-bug check Event Viewer logs in agent machine.

Credential Scan failing

Please use validate SMB process

1. Please download the executable to help check for SMB status for assets getting scanned via Probe agent.

https://betadev.mycybercns.com/agents/validatesmb/validatesmb.exe

2. Open PowerShell as an administrator

3. Run below command on the probe agent system

For Domain joined asset:

>> .\validatesmb.exe validatesmb IP domain username password

Example

>> .\validatesmb.exe validatesmb 10.0.0.202 abc.com administrator abcd@987#

For workgroup asset:

>>.\validatesmb.exe validatesmb IP '""' username password

Example

>>.\validatesmb.exe validatesmb 10.0.0.202 '""' administrator abcd@987#