Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Info

CyberCNS can evaluate the security policy of your WatchGuard Firewall and flag any potential security gaps. You can initiate a Firewall Scan from the Integrations menu.

Navigate to Integrations

  1. ⚙In the CyberCNS portal, navigate to Global Settings( ) > Integrations and choose WatchGuard from the integrations listed.

  2. Next, is to add credentials for your WatchGuard firewall

...

Enter Credentials

Info

Credentials should have ssh access to the firewall from the probe machine.

3. Enter Name: Choose a name of your choice for the credentials to be added.

...

5. Enter Port Number: Enter the Port Number for the credentials to be added. Currently, use port 4118.

6. Enter Username: Enter the username used to log in to WatchGuard Firewall. It is recommended that you define a special username to be used exclusively for these scans so that they can be identified in the firewall’s logs.

7. Enter Password: Enter the password used containing only alphanumeric characters to log in to WatchGuard Firewall.

...

8. Select an associated Company: Select the existing company from the drop-down in order to add the firewall as an asset of that company.

...

Completed firewall scans are listed with timestamps as shown below. To view the results of a scan, select the scan in the list.

...

The scan results can be be downloaded as a report in the Microsoft Word .docx format by clicking Download Report.

...

This completes the documentation of the WatchGuard Firewall Scan..