| Table of Contents | ||||
|---|---|---|---|---|
|
| Info |
|---|
External Scan (Beta) - Now CyberCNS helps with deep external scan with an ability to customise the port selection. |
At the Company Level, navigate to the External Scan(Beta) to create your own profile.
...
Profiles
Users can create different profiles based on the requirement and attach them to assets to be scanned for external scans.
...
In the profiles section, enter the Profile Name as required and select the Port Scan Type.
There are two types of Ports, those are Top Ports and Custom Ports.
...
Top Ports
In Top ports, you can choose the number of ports(100, 500, 1000, 3000, 5000, 10000, and 65535 ports) as required.
...
Once the profile is created successfully, you can either Edit or Delete the created profile in case required.
...
Configurations
When the profile is created, navigate to the Configurations section and click on +Add to add the External Scan Endpoints.
...
The created profile can be chosen here if required, if not can select the Scan profile.
...
Enter the secure ports for the required IP address.
To enter multiple ports, press the enter key or enter a comma before adding the next port.
...
Once all the details are provided, click on Save.
Can select the checkbox in case need to exclude the IP from scanning.
...
To start the scan, select the checkbox to Scan the added IP and then click on Scan Now under Global Actions, or under the Action select the option as Scan Now.
There is an option to Edit or Delete the Discovery Type using the Action column. Any Discovery Type can be edited or deleted if needed.
...
Jobs
| Info |
|---|
All the jobs for the external scan will be shown in the Jobs tab. This will list all jobs which were initiated and with their status. |
When the scan begins, navigate to the Jobs section to check the Job Completion.
...
Results
| Info |
|---|
All the Results for the external scan are shown in the Results tab. |
...
For the added IP can get the details based on the Selected profile.
Information such as Ports Scan, Protocol Scan, Service Detections, OverAll Grade, Open Ports, Vulnerabilities, and Operating System Details will be displayed.
...
Custom Ports
For custom ports, enter multiple ports of your own by adding commas. Choose the Protocols as required from below:
...
This completes the documentation of External Scan(Beta).